← All Articles

Apple Cluster Control · iOS

No-jailbreak, proxy/BT/OTG modes, mirroring, batch ops

61 articles · page 1 / 6
Apple Cluster ControlPC Specs

What PC Specs Does Apple Cluster Control Need? A Build List for 10 to 100 iPhones

An i5-10400 with 16 GB ran 94 iPhones mirroring at once. An R5 5600G handled 160 with scripts and mirroring together. The build list for controlling iPhones from a PC: what CPU, RAM and USB ports you need at 10, 50 and 100 devices, how to pick a motherboard, how to expand when the ports run out, and the X99 chipset trap.

7 min read
Apple Cluster ControlCost

Which Apple Cluster Control Costs Can You Skip? A Saving List

The same starter setup cost one person over 6,000 and another 2,800. Bargaining skill is a poor explanation of the gap. This splits the spend into what you can skip and what comes back if you skip it, and describes the form that bill takes.

5 min read
Apple Cluster ControlCost

How Much Does One Cluster Control Set Cost? Same Apple Cluster Control Licence, Quotes from 2,000 to 6,000

The same Apple cluster control licence covering one thousand devices, quoted at 2,100 by one vendor and 6,200 by another. The gap usually sits in four vague definitions. Hardware rarely explains it. This starts by pinning down what "one set" covers, then gives a list of questions to ask before comparing.

5 min read
How Do You Choose PC Cluster Control for Phones? Can Apple and Android Share One Setup?
Apple Cluster ControlAndroid Cluster Control

How Do You Choose PC Cluster Control for Phones? Can Apple and Android Share One Setup?

Can one computer manage Android phones and iPhones with one system? It can, and the script action layer still has to be written separately for each. This article covers how the two platforms' channels differ, how far unified management goes, the three places mixed management fails most often, and when it is better to manage them apart.

6 min read
Apple cluster controlagency operations

Keeping Client Accounts Apart: Isolation in Apple Cluster Control

An agency fears cross-contamination: a client account touched on another client device. Two layers of isolation, plus the three ways it goes wrong.

7 min read
A Batch of Accounts Got Throttled at Once: How to Handle It on Apple Cluster Control
Apple cluster controlcluster control risk

A Batch of Accounts Got Throttled at Once: How to Handle It on Apple Cluster Control

The site already has two pieces on how to prevent this. This one only covers what to do after it has already happened: what to do in the first hour after you notice the anomaly, whether to isolate by device or by account, how to tell whether the problem is the device, the network, or the content, and the three mistakes that are easiest to make during recovery. It gives the basis for judgment and the order of response. Evasion methods are outside this piece.

7 min read
Overheating, Swollen Batteries, and Charging Failures: The Hardware Failure Order for Apple Cluster Control
Apple cluster controliPhone fleet maintenance

Overheating, Swollen Batteries, and Charging Failures: The Hardware Failure Order for Apple Cluster Control

The site has already covered how to prevent device wear. This piece only covers what to do after something has already failed: how to triage each of the three fault types, which layer to rule out first when a device will not connect, how to tell load heat from abnormal heat, why a swollen battery has to be taken out of use immediately, and the three lines for deciding repair or replace.

7 min read
Apple cluster controlcluster control selection

Scaling Apple Cluster Control From 5 to 30: Fix These Three First

Five devices run fine — so buy twenty-five more? No, and the reason is sequencing: devices are the last thing you buy. Plus when not to scale at all.

7 min read
apple phone scriptsApple cluster control

Apple Phone Scripts: Four Approaches From Jailbreak to Cluster Control

Apple phone scripts, four questions: jailbreak, signing, install, code. Two axes separate four routes, ranked by system version and upkeep cost.

8 min read
iOSScript Development

How to Write iOS No-Jailbreak Scripts: From Setup to a First Working Script

The slow part of iOS no-jailbreak scripting is not the logic but what each function returns. Environment, function map, coordinates, debugging, rolling out.

15 min read
Calling iOS No-Jailbreak Scripts from Python: How the Open API Connects
iOSScript Development

Calling iOS No-Jailbreak Scripts from Python: How the Open API Connects

A script does not have to be started by hand in the console. The open API turns the device list, taps and swipes, input, the photo library, and start/stop into HTTP calls: the address, the response convention, and a USB HID run in three steps from fetching the deviceId.

8 min read
Apple Cluster Control for Facebook: Bulk Marketplace Listings and Inquiry Replies Across Dozens of Accounts
iosbatch operations

Apple Cluster Control for Facebook: Bulk Marketplace Listings and Inquiry Replies Across Dozens of Accounts

Marketplace work and posting to a page are two different jobs: one side lists goods, the other answers "is it still available." This covers how to schedule bulk listing, how to sort inquiry messages, who cleans up sold and expired items, and which stretch is a fit for iEasyRun.

6 min read